1-Shot Hardener - Pint 4007 Pint
Item Number: 1SHOT4007PT
Availability: Normally in Stock
  • Type: 1-Shot Anti-Graffiti

Price

/

Unit

Qty Order

$63.16 / PT
Companion Products
Item Detail
View Inventory
Recently Viewed
Results 1 - 7 of 7
 
1/2"x48"x96" Finished 1 Side & Primed 1 Side MDO Plywood
  • Item #: MDO1/2F1P1
  • 48 X 96
  • Finished 1 Side
  • 1/2"

  • × 
    3M PPS Lid & Liner Refill Medium 650ml 16000
  • Item #: 16000
  • 3M PPS Products
  • Lids & Liners

  • × 
    Signstrip Blue 5 Gallon Pail NBSS
  • Item #: NUBLUE5
  • Spraylat Sign-Strip

  • × 
    Empty Can - Gallon BKY142
  • Item #: ECG
  • Empty Cans

  • × 

    × 
    3M PPS Cup & Collar Medium 16001
  • Item #: 16001
  • 3M PPS Products
  • Cups & Collars

  • × 
     
    Paper Paint Strainer 3041
  • Item #: 3041
  • Paint Strainers

  • × 
    Results 1 - 7 of 7
    Untitled Document

    1 SHOT Hardener

    1 Shot 4007 Hardener not only accelerates the drying times of 1 Shot Lettering and Pearlescent Enamels and Chromatic Bulletins; but enhances adhesion qualities as well. The use of 4007 Hardener also aids in preventing lifting when automotive clears are used over 1 Shot Lettering Enamels. While greatly reducing the workable pot life of your 1 Shot Enamels, adding up to 20% 4007 Hardener in place of any other reducers, will allow for clear coating within 12-24 hours.
    NOTE: As with all custom paint procedures, test panels should be utilized, and the first two coats of clear should be applied very dry.
    Replace cap tightly after use, to prevent crystallization.

    - Available | - Not Avaiable
    No results for your search were found.