- Product: Punches & Dies
Xpert Corner Rounder and Hole Punch with Base and Arbor
Corner Rounder – This Corner Rounder is the ultimate tool for rounding corners on aluminum, brass magnetic, copper, sheet metal, ACM or Dibond type material, omega board, coroplast and PVC and many more substrates. The convenience of this tool comes from the fact that there is not set-up required and with one simple punch you can create four different radii, - no measuring, marking or sanding individual corners.
6” X 6” X ¾” tool that fits easily into the arbor base. No set-up, four punch sizes in one tool ready to go. Just rotate the die and you will ¼”, ½”, ¾” and 1” corners. Very clean cut ready. The shear will accommodate up to .080 aluminum and 3mm ACM with ease.
Hole Punch - The specialty hole punch is a must have for every sign shop working with aluminum (up to .090), 3Tmm Aluminum Composite panel (Dibond type), magnetics, PVC and many more substrates. Very clean ¼” hole. Adjustable guide blocks allow you to quickly set to punch a hole ¼,” ½”, ¾” or 1” from the corners creating the same hole offset along the edges. Simply insert your material and use a press to punch the holes where you want them.
The tool base works with both the corner rounder and the hole punch. Set the base on the arbor press, tighten the knobs on each side to hold it in place, drop you tool into the top and you are ready to go. Tools are not screwed or bolted in so they are easy to change out.
Mount this hand-operated arbor press onto your workbench to handle both the corner rounder and the hole punch. The arbor press applies a maximum 2000 lb. force and features all-metal construction with a large base and slotted table plate. With mounting holes included, this arbor press sets up quickly and easily.
· Max. height: 5-1/2 in.
· Max. diameter: 8 in.
· Leverage ratio: 20:1
· Largest arbor: 1-1/8 in.
· All metal construction
· Large base and slotted table plate